The technical flow of the production line
Steel Tape¡ú¡ú
Double-head uncoiler ¡ú¡úStrip-head Cutter and welder¡ú¡úSpiral
Accumulator¡ú¡úForming section(Flattening unit +Main driving unit +Forming
unit +Guide unit +High frequency induction welding unit +squeeze
roller)+ De-burr frame ¡ú¡úCooling unit ¡ú¡ú Sizing unit and straightener
¡ú¡úFlying saw under computer-control ¡ú¡ú Run-out table¡ú¡ústraightening
Technical parameter for the unit
|
Steel pipe specification |
Square pipe:50X50mm ¨C150X150mm |
|
Pipe thickness |
2.0-5.0mm |
|
Pipe length |
6.0-12.0m |
|
Length tolerance |
0-6mm |
|
Material |
Carbon steel (¦Äb¡Ü500Mpa, ¦Äs¡Ü235Mpa) |
|
Steel coil I.D. |
510-610mm |
|
Steel coil O.D. |
Max. 2000mm |
|
Steel coil width |
200-520mm |
|
Steel coil weight |
Max. 8 tons |
|
Electricity |
Dynamic power: AC 380V¡À 10%, 3 phases, 60Hz ¡À 1% |
|
Installed capacity |
900KW |
|
Cooling water |
1. Reservoir for High Frequency equipment: 30 m3, one set |
|
Compressed air |
Pressure:0.4Mpa |
|
Annual output |
70000tons |
